.jpg)
Coyote Sender Locations
Coyote oil pressure & temperature sending unit installation locations.
Coyote Oil Pressure Sender Mounting Location:
Remove stock oil pressure sender from the block located behind the alternator.
Use a “T” connector to install the Classic Instruments and stock oil pressure senders in the original location.
Coyote Temperature Sender Mounting Location:
Remove the 3/4" NPT plug from the side of the block which is next to the oil pressure sender. A H14 or hex key or socket is required.
Then, use a 3/4" NPT to 1/2" NPT adapter to mount the Classic Instruments temperature sender in this location.